TOOLS AND EQUIPMENT - ANSWERS
V. Ryan © 2011-2017
PDF FILE - CLICK HERE FOR PRINTABLE WORKSHEET | |
Name each of the tools / equipment shown below. |
|
NAME: Woodworkers Try
Square TYPICAL USE: Used to mark out accurate ninety degree angles. Useful when marking out joints such as mortise and tenons, finger joints and dovetail joints. |
|
NAME: Bevel Edged
Chisel TYPICAL USE: Used when cutting joints such as dovetail and finger joints, removing material to create an accurate fit. Can also be used to shape natural or manmade wood based materials. |
|
NAME: Tenon Saw TYPICAL USE: Used for cutting wood based materials to length. Often used for cutting joints such as dovetail and finger joints. In the workshop, the tenon saw is regarded as a general saw |
|
NAME: Coping Saw TYPICAL USE: Used typically for cutting unusual shapes such as curves. Often used when a fretsaw is not available. Can be used to remove the waste material when cutting dovetail or finger joints. |
|
NAME: Hacksaw TYPICAL USE: Used for cutting metals such as steel. Can be used to cut both ferrous and non-ferrous metals. Blades of varying teeth per inch (TPI) are available, allowing the user to select the right blade to suit the materials he/she is cutting. |
|
CLICK HERE FOR INFORMATION ON TOOLS AND EQUIPMENT | |
CLICK HERE FOR RESISTANT MATERIALS INDEX PAGE | |
|