PILOT 3 - EXERCISE 3 |
|
V.Ryan © 2005 |
|
USING PILOT 3 TO PRODUCE AN ARC OF MOVEMENT |
|
Try programming the RCX so
that it moves forward producing a wide arc of a circle
(clockwise direction) until the front micro-switch is
pressed and then reverses, following the same arc of a
circle. Once the back micro-switch is pressed the RCX should
move forward again. The programme should loop.
|
|
STEPS INVOLVED, USING PILOT 3 | |
|
|
BACK TO ROBOLAB INDEX | |
|
|