CLICK HERE FOR INDEX PAGE

PRODUCT DESIGN REVISION  (DESIGN AND MANUFACTURE) 2

V. Ryan 2009-2017

 

PDF FILE - CLICK HERE FOR PRINTABLE VERSION
 
 
CLICK HERE FOR MORE INFORMATION ON SCALES OF PRODUCTION
Single Item / Prototype Production - Example 1
Batch Production - Example 1
Continuous Production - Example 1
CIM - Computer Integrated Manufacture - 1
Flexible Manufacturing Systems - FMS - 1
Remote Manufacturing
 
3. Five hundred clocks of your design are to be made. Underline the type/scale of production.
 
SINGLE ITEM/ONE OFF - BATCH - CONTINUOUS
 
4. Using notes and sketches explain how your clock could be manufactured. List materials, tools and equipment you intend to use. You can use up to six stages of manufacture. Each of the 500 clocks should be exactly the same.
 
Quality Control is an essential aspect of manufacturing. Quality control takes place when the product is checked for quality during most stages of manufacture. Damage to the product is identified and poor quality products are removed.
Quality Assurance does not check the quality of the final product but the quality of all systems on the production line, staff training and quality monitoring.

5. Explain the procedures you would implement to ensure that every clock was of the highest possible quality. The following key words / phrases may help you answer the question.
 
USE TEMPLATES - CHECK MEASUREMENTS - ACCURACY OF MANUFACTURE  - ENSURE HIGH QUALITY - REJECTS - QUALITY ASSURANCE IN PLACE
 
 
 
 
 
 
 
 
 
6. Draw a line from the scale of production to its correct description.
 
7. Draw a line from the material to the correct method of finishing.
 
 
 
CLICK HERE FOR PRODUCT DESIGN INDEX PAGE
   
 
Google
 
Web www.technologystudent.com